Hi Clay,
One thing you might want to check.
See if you can get inside the power supply...disconnect it first. Take a
look on the PCB near the power connector. There may be a space on the
PCB where you can install a power line filter....something like a CorCom
or similar. Sometimes they leave them out on some models to save money.
If you Google CorCom you find info on the different models...just be
sure to get the correct ratings. They also sell filters with built-in
IEC connectors. An IEC connector is what the power cord plugs into.
you may be able to get one that works.
On 7/20/2013 9:27 AM, Clay Melhorn wrote:
Hello to the group.I recently built an AMD quadcore machine I intend to
eventually replace my trusty XP Pro machines.
Foolishly got in a hurry to complete the build and purchased a PS from a local
shop.It supplies the power required without issue, I have discovered why the
price was so good.Jim Brown will love this one, virtually no RFC filtering, you
get what you pay for and I know betterjust didn't realize the noise from 40m
and down would be SO intense particularly on a Delta pennantthat points back
toward the shack's general direction. The XP machines are very quiet.Live and
learn.
Question: Looking at another "good deal" how do the COOLER MASTER PS's rate for
RFC filteringor are there others brand I should be looking at?
http://www.newegg.com/Product/Product.aspx?Item=N82E16817171031&nm_mc=EMC-EXPRESS072013&cm_mmc=EMC-EXPRESS072013-_-EMC-072013-Index-_-PowerSupplies-_-17171031-L04B
Will likely not waste time trying to make a Cadillac out of the Yugo I
purchased.
Thankyou in advance,
Clay Melhorn N9IO Bonfield, ILWebmaster: KARS - Kankakee Area Radio Society -
W9AZ http://www.w9az.com/
_________________
Topband Reflector
--
73,
Gary K9GS
Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032 http://www.cwops.org
************************************************
_________________
Topband Reflector
|