Don't you mean IMD from the radio/amp driven past ALC?
CW is a binary signal and no one complains of its "phase noise" .....
Mike KC7NOA
> From: n4is@comcast.net
> To: wa3mej@comcast.net; topband@contesting.com
> Date: Fri, 30 Dec 2011 22:59:09 -0500
> Subject: Re: Topband: digital on 1838 +/-
>
>
>
> -----Original Message-----
> From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
> On Behalf Of wa3mej@comcast.net
> Sent: Friday, December 30, 2011 10:47 PM
> To: topband@contesting.com
> Subject: Re: Topband: digital on 1838 +/-
>
>
> Jim
>
> >>>Consider this however, CW and digital modes like JT65 typically share the
> >>>CW portion of the bands<<<.
>
> That is not the case on weak signal bands, and in special 6m, digital modes
> are above 50.250 MHz, there is a clear reason for that, digital is not a
> narrow mode, there are phase noises that can trash the band.
>
>
> Regards
> Jose Carlos
> N4IS
>
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|