Use flooded cable- its air spaces are flooded with goo that does pretty
well at keeping water out. Flooded cable is available from many
suppliers - quad shield flooded cable is pretty standard for the cable TV
folks. If a section of the line gets damaged, the goo will mostly keep the
water from wicking along the cable and killing the whole run
check with whatever supplier you use, or do a search for flooded RG-6 &
pick the best price for you
DO use the correct connectors
73
Robin, WA6CDR
----- Original Message -----
From: "Larry Pasman" <lrpmbt@comcast.net>
To: <topband@contesting.com>
Sent: Tuesday, April 06, 2010 13:11
Subject: Topband: deterioration of RG-6
> Any coax or feedline is likely to get moisture in it. Aluminum turns to a
> white powder and copper turns black. What is happening is temperature
> changes from day to night. Each time temperature cools down the coax acts
> like a big straw and sucks in moisture and can do so for several feet. If
> the run is down hill water can make it all the way to the shack. If you
> are
> making a splice and cannot seal it very well is not use electrical tape.
> Tape will only hold moisture in and not let it dry. Using "F" connectors
> and
> a double female will work if out in the open to allow drying. Simply
> mount
> it on a small post above ground and put a flap of some sort over it.
> Taping
> over connectors will only allow it to get wet and not dry.
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|