--- Earl W Cunningham <k6se@juno.com> wrote:
> ==========
> The best spacing for a two-element broadside array
> is 5/8-wavelength.
If your goal is to optimize the picture on your
computer then by all means use 5/8 wave spacing. If
you live 10 miles out from the nearest power line or
computer, there is no question that 5/8 wave spacing
is best. But if you are like most folks who have to
use flags/pennants because of space restrictions, I
seriously doubt if the dominant noise sources are very
far away. In this case 5/8 wave spacing provides
almost NO noise rejection at all. The null is up
around 30 degrees and your noise is arriving at zero
degrees. Use 1/2 wave spacing or about 270 feet on 160
for optimum performance in a typical urban
environment.
I've used both spacings on broadside flags and I can
state very positively that 5/8 wave spacing is useless
in town!
73,
Larry - W7IUV
DN07dg
http://w7iuv.com
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|