Hello Wes
We agree!
Wes Attaway wrote:
> I just use regular solder and then swab the joint with a gob of roofing
> compund.
We done exactly the same with two 5 element phased array systems. Used 1/2"
copper pipe in a loop config and soldered the radials to it with regular
solder. All gooped with roofing compound.
> You can get a lifetime supply of it (for solder joint purposes) at
> Home Depot for a few dollars. I have connections that have been in the
> ground for over 20-years and they are still fine.
Ours in the ground nearly 5 years without problem that we are aware.
73 George W8UVZ
--
FAQ on WWW: http://www.contesting.com/FAQ/topband
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|