TenTec
[Top] [All Lists]

Re: [TenTec] Omni VI plus to computer hookup

To: Ten-Tec List <tentec@contesting.com>
Subject: Re: [TenTec] Omni VI plus to computer hookup
From: Jim Goudie <jagoudie@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 13 Jan 2018 15:38:34 -0500
List-post: <mailto:tentec@contesting.com>
Thanks for the responses!  I appreciate your help.  I’ll report back with my 
success story ;-)
73,
Jim  AF3Z

Jim Goudie   —  jagoudie@comcast.net
610 Kraybill Church Rd
Mount Joy, PA 17552

> On Jan 13, 2018, at 3:31 PM, Stan Gammons <s_gammons@charter.net> wrote:
> 
> On 1/13/2018 2:13 PM, Jim Goudie wrote:
>> Hello,
>> 
>> My Omni VI opt. 3 is hooked up to my old Dell Laptop (new in Dec 2000).  I 
>> use that connection almost entirely for logging.
>> 
>> It’s about time I retire that old laptop, but newer computers don’t have 
>> those old wide connections any more (I didn’t look up the name for those 
>> thingees);  I assume that I’ll probably have to work through a USB port.
>> 
>> What it needed to go from the Omni VI opt 3 to a USB port and a good working 
>> connection to the computer?  If this is old hat stuff, as opposed to Red Hat 
>> stuff, feel free to just point me in the right direction….
>> 
>> 
> 
> You'll need a USB to serial adapter.  Something like this 
> http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=5866899&SRCCODE=3WGOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE&scid=scbplp7378756&sc_intid=7378756&utm_source=bing&utm_medium=cpc&utm_campaign=SC%20Shopping%20-%20Brands%2FNumbers&utm_term=4581458795429691&utm_content=All%20Products
>  
> <http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=5866899&SRCCODE=3WGOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE&scid=scbplp7378756&sc_intid=7378756&utm_source=bing&utm_medium=cpc&utm_campaign=SC%20Shopping%20-%20Brands%2FNumbers&utm_term=4581458795429691&utm_content=All%20Products>
> 
> I would think the cable that's used to connect the rig to the Dell laptop 
> will work with an adapter like this.  If not, the pinout for the cable is in 
> the Omni VI manual.
> 
> hth
> 
> 73
> 
> Stan
> KM4HQE
> 
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com <mailto:TenTec@contesting.com>
> http://lists.contesting.com/mailman/listinfo/tentec 
> <http://lists.contesting.com/mailman/listinfo/tentec>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>