TenTec
[Top] [All Lists]

Re: [TenTec] Omni VI plus to computer hookup

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Omni VI plus to computer hookup
From: Carl Moreschi <n4py3@earthlink.net>
Reply-to: n4py3@earthlink.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 13 Jan 2018 16:36:27 -0500
List-post: <mailto:tentec@contesting.com>
I believe there is a CIV jack on the back of the Omni VI. The Omni VI uses the Icom command set and all you need is a USB to CIV converter. Search for one online. That's a much simpler hookup.

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 1/13/2018 3:38 PM, Jim Goudie wrote:
Thanks for the responses!  I appreciate your help.  I’ll report back with my 
success story ;-)
73,
Jim  AF3Z

Jim Goudie   —  jagoudie@comcast.net
610 Kraybill Church Rd
Mount Joy, PA 17552

On Jan 13, 2018, at 3:31 PM, Stan Gammons<s_gammons@charter.net>  wrote:

On 1/13/2018 2:13 PM, Jim Goudie wrote:
Hello,

My Omni VI opt. 3 is hooked up to my old Dell Laptop (new in Dec 2000).  I use 
that connection almost entirely for logging.

It’s about time I retire that old laptop, but newer computers don’t have those old wide 
connections any more (I didn’t look up the name for those thingees);  I assume that I’ll 
probably have to work through a USB port.

What it needed to go from the Omni VI opt 3 to a USB port and a good working 
connection to the computer?  If this is old hat stuff, as opposed to Red Hat stuff, 
feel free to just point me in the right direction….



You'll need a USB to serial adapter.  Something like this 
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=5866899&SRCCODE=3WGOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE&scid=scbplp7378756&sc_intid=7378756&utm_source=bing&utm_medium=cpc&utm_campaign=SC%20Shopping%20-%20Brands%2FNumbers&utm_term=4581458795429691&utm_content=All%20Products<http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=5866899&SRCCODE=3WGOOGLEBASE&cm_mmc_o=VRqCjC7BBTkwCjCECjCE&scid=scbplp7378756&sc_intid=7378756&utm_source=bing&utm_medium=cpc&utm_campaign=SC%20Shopping%20-%20Brands%2FNumbers&utm_term=4581458795429691&utm_content=All%20Products>

I would think the cable that's used to connect the rig to the Dell laptop will 
work with an adapter like this.  If not, the pinout for the cable is in the 
Omni VI manual.

hth

73

Stan
KM4HQE



_______________________________________________
TenTec mailing list
TenTec@contesting.com<mailto:TenTec@contesting.com>
http://lists.contesting.com/mailman/listinfo/tentec<http://lists.contesting.com/mailman/listinfo/tentec>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>