New to the list, so I hope this is not a FAQ. My OMNI V has a long standing
problem with the display. When powering up, the rightmost (least significant
digit) shows up on the leftmost part of the display. Either cycling the power
off/on or using the reset resets the display properly. Also my V has the
problen with hiss noise cycling with the AGC. I recall that there was a fix
for that. I have been off the air for > 10 years so have been out of touch
with latest developments. Any help greatly appreciated.
Bruce W0BF
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|