TenTec
[Top] [All Lists]

Re: [TenTec] best CW decoder/xmit program for ten tecs

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] best CW decoder/xmit program for ten tecs
From: "Paul Gates, KD3JF" <pearly732003@yahoo.com>
Reply-to: kd3jf@arrl.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 14 Sep 2007 21:20:19 -0700 (PDT)
List-post: <mailto:tentec@contesting.com>
Glad for your success. I had 2 of the code readers and never could get them to 
work.

Paul Gates

n4dxi@aol.com wrote: A simple solution is the MFJ 464 Code Reader with its 
built in keyer.  It has 4 message memories, enough for most contests.  It is 
best receiving strong, fast cw stations, a great help to me in contests where 
the speed is beyond my capabilities or I am unsure of the call.
It is poorest with slow speed or a lot of QRM.  

I found the display too small so I bought a used junk pc for $3 including a 
monitor and cabled the MFJ 464 to the pc.  Now I have a full screen display of 
incoming cw.

You can also connect a keyboard to the MFJ 464 if you wish to send cw via a 
computer keyboard (again, you can buy these very cheaply used).

The MFJ 464 is no match for an experienced cw operator especially when digging 
out weak calls but when the speed gets too fast for me, especially during 
contests, the MFJ 464 is a great help.

By using the MFJ 464 with an old pc, you can save your good pc for logging and 
any internet work.  Yes, I could open another window and read the code with my 
good pc but that would make my logging window cluttered.  Many logging 
programs do not have a cw decoder.  I use N3FJP's logger which I like because 
it is fairly straightforward and reliable, but it does not have a cw reader.  

Hope this helps...73, John Bescher, n4dxi






-----Original Message-----
From: Chuck & Vicki Tifft 
To: Discussion of Ten-Tec Equipment 
Sent: Fri, 14 Sep 2007 3:42 pm
Subject: Re: [TenTec] best CW decoder/xmit program for ten tecs



CW get is an excellent program and I think it is free. Although my favorite 
n a pair of cans on my hears.
6RD
---- Original Message ----- 
rom: "john ferro" 
o: 
ent: Friday, September 14, 2007 9:27 AM
ubject: [TenTec] best CW decoder/xmit program for ten tecs

hi, in your experience what is the best cw decoder/transmitter program for 
en tecs? i'm looking for something simple to use with a computer sound card 
tc. as i get up to speed with my code capabilities. anyone have any 
uggestions?
________________________________________________________________
ear up for Halo® 3 with free downloads and an exclusive offer. Itâ??s our way 
f saying thanks for using Windows Liveâ?¢.
ttp://gethalo3gear.com?ocid=SeptemberWLHalo3_WLHMTxt_2
______________________________________________
enTec mailing list
enTec@contesting.com
ttp://lists.contesting.com/mailman/listinfo/tentec 
_______________________________________________
enTec mailing list
enTec@contesting.com
ttp://lists.contesting.com/mailman/listinfo/tentec


________________________________________________________________________
Email and AIM finally together. You've gotta check out free AOL Mail! - 
http://mail.aol.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>