Next Question Ham operators,
On the Tentec Centurian it is rated at 110V with 30 amp draw and for 220V
it needs 15amp draw.
QRO has a unit that is running two 500z's with a 110v current draw of 20amps
and a 220v current draw of 20 amps. I beleve it is the one with 32 lb
transformer from DAHL.
Can anyone explain if it is the size and make of the transformer that is
making such a difference in the required currnt draw. These amps are close
to apples to apples and oranges to oranges comparisons in wattage output and
tubes. QRO has two models -- one with a 21 lb transformer with Pride tubes
and QSK optional for $1895.00 and one with a 32 lb transformer choice of
Amperex tubes or Triton tubes and QSK ready to go for $2095.00.
Is the Tentec Transformer a reason for the different current consumption?
That appears to be a substantial difference in power requirements.
Something I have to keep an eye on.
This is one that I don't have an answer too. Anyone ever check the weight of
a tentec Centurian Transformer?? How do I compare this aspect in looking at
various Amps? I see nothing in the Tentec literature on the Transformer
other than wiring and current needed.
Paul
KI8HO
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|