Having difficulty setting up 2 Tone FSK transmit.
Here is what I'm trying to setup:
- K3 with a W3YY FSK Optical Interface (uses Pin 3 for RTTY TxD)
- PCI serial port (com 3)
- Win 10 (Home, Creator),N1MM (latest update)
- 2 Tone 16.11a
FSK transmit works with MMTTY.
2 Tone setup:
- FSK Tx
- Com 3, FSK = TxD , PTT = No
When I transmit, I briefly see a Tx red indication, and I see what I
intended to transmit scroll across the screen. FWIW, Receive works fine,
both setup as the primary N1MM RTTY interface, and as an additional Rx
with MMTTY setup as primary.
Any suggestions? Thanks,
- 73, John, N0TA
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|