David,
It is very easy to establish and select profiles.
1) Open MMTTY and set all your desired parameters.
2) Select "Profiles | Save to file" Give it a unique name. Like AD4TJ. it
will save the file as AD4TJ.PRO
3) Select "Profiles | Assign Menu" Name the new menu item AD4TJ (must match
the Profile name)
4) Close MMTTY and re-open, AD4TJ will now appear on the menu selections.
Check it and it will load the previous saved profile. It will now open with
that profile each time until you chose another one.
To simplify my MMTTY experience I have three operating profiles:
FT-920_FSK.PRO
FT-920_AFSK.PRO
IC-735_LSB.PRO
I run two copies of MMTTY under Logger32 and the selected Profile has a
check mark by it. That way I don't have to remember which profile is in use.
Unfortunately the standalone version does not have this indicator.
73s de Jim
W5IFP
>
> -----Original Message-----
> From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of David Tanks
> Sent: Tuesday, January 08, 2013 9:42 AM
> To: RTTY@contesting.com
> Subject: [RTTY] MMTTY Profiles
>
> Hello all. I am unable to determine what profile MMTTY is set
> up for, and unable to find any help files that elaborate on the
> subject. Is there an easy way to determine what profile that
> MMTTY is currrently using? Thanks in advance.
>
> 73, David AD4TJ A relatively new operator to RTTY
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|