Hey John
I run RTTY FSK from the FSK Din Port on the back of the FT 1000 straght to
the PK-232 DSP unit.
When you run AFSK which is LSB you are 2 KCs off from the FSK Frequency.
You can also run USB but most fellows use LSB which is the standard.
I ran AFSK for many years and had to always remember to spot 2 KCs from what
my VFO said.
I can't remember if it was up 2 or down.
GL 73s de John W4DJ
>From: "John Holmes" <w9ily@arrl.net>
>Reply-To: w9ily@arrl.net
>To: <RTTY@contesting.com>
>Subject: [RTTY] FT1000 Field Settings
>Date: Thu, 26 Jan 2006 12:04:28 -0600
>
>Guys, I just spoke with a ham using the FT1000 Field and he had a question
>that I thought should be referred to the group as I don't have this type of
>rig. The question:
>"I am operating FSK with an FT1000 Field and the receive stations are all
>off freq when I operate RTTY LSB...should I use RTTY USB? When I switch to
>RTY-USB the receive changes. In any case I can copy using the clarifier
>offset."
>Could someone let me know the correct settings for FSK on the 1000 Field
>and
>I will relay the info.
>Thanks in advance. 73,
>
>John W9ILY
>
>_______________________________________________
>RTTY mailing list
>RTTY@contesting.com
>http://lists.contesting.com/mailman/listinfo/rtty
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|