[Karlnet] Ubicomm Karlnet Clients

[Blair Drew Davis <theory@datawise.net>]

We have several of the Ubicomm Karlnet Clients in place talking to 
Karlnet Turbocell 4.43 ap's.

These work quite well, with one major issue.

The Ubicomm's won't pass traffic when used with a Karlnet COR 4.43 
flashed on to a WavePoint II or AP-1000 if it is the older hardware that 
has only a 10Mbit ethernet port.  If the hardware used is the later 
WavePoint IIE or Ap-1000 with the 10/100Mbit ethernet port, it works 
fine.  This problem has been reproduced by CWLabs.  I have heard that 
this problem is in the Ubicomm's and that there is a flash upgrade to 
fix it, but I have not yet found it.....

Has anyone tried using the Ubicomm's with a Lucent COR 4.15 as the AP?

We have been getting the Ubicomm's from CWLabs.  CWLabs says they may 
not be carrying the Ubicomm's any longer.  Anyone know of other 
suppliers carrying them?


--
Blair Davis
Computer Adjusters of Allegan
www.computeradjusters.com
(616) 673-0054

AOL Instant Message Screen Name       theory240