On the URL:
http://www.mikrotik.com/Documentation/mini_pci_abg_pigtail.pdf
They have a Wireless MiniPCI Card 802.11a+b+g
"This universal Multi-Band (2.4 GHz, 2.5-2.7 GHz, 5.2-5.8 GHz)
MiniPCI operates in any existing IEEE wireless standard. It minimizes
any potential confusion or incompatibilities caused by having three
separate wireless devices. The Multi-Band MiniPCI enables users
to build wide and high-speed networks with great amount of wireless
clients. The new IEEE 802.11g standard increases the data rate of
IEEE 802.11b networks from 11 Mbps to 54 Mbps. The 5G/AGP
includes miniPCI Wireless card and pigtail."
Tha card have the chpset Atheros AR5211, AR 5111 and AR 2111
In the KN-200 spec. I have read that it support Atheros AR5211.
On the KN200 backside there is a miniPCI conector. Does this work?
My question is.
Can I use this MiniPCI card from Microtik on tha KN-200 board?
If this work, many of our backbone problem are solved!
I then can use the 5 GHz band for the link and 2.4 GHz to the
costumers on the same time on the KN-200. With this solutions
it is possible to build inexpensive and fast backbones!
If not, is it possible to get support for this miniPCI card
and if when?
/Paul
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet