|
Will,
I will
not attempt an answer. Seems you have something misconfigured.
PLEASE
call tech support 614-822-0023 for assistance.
Kevin
*************************************
Kevin R.
Knuth
Regional Business Development Manager
614-822-5275 Corporate
Office
260-424-9690 Home Office
260-402-6086
Cell
www.karlnet.com
*************************************
I have sec client and ap-plus on 2 ap-1000 using 3 silver cards. The ap-plus is running mobile router on the
a card and 802.11b on the b card. I would like to straight bridge the 2
aps but when I turn on bridging it works for maybe a
minute and dies. When it dies I cant ping anything
the two aps or my gateway. I have tried ip routing with separate non public ips on the different interfaces but
nothing. The weird part is when I do a wireless link test from config the only way the ap plus
sees the client is through the 802.11b interface not not the ap-plus \ mobile router
on card A. If I turn off the b interface they will not showup in the wireless link test. FYI: both the ap=plus
and sec client are version 4.02 and all firmware has been updated. Any help is greatly appreciated.
Will
---
Outgoing mail is certified Virus Free.
Checked by
AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.365 / Virus
Database: 202 - Release Date:
5/24/2002
|