David
Interesting experiment. I would be very interested in finding out the
results. Please post them to the newsgoup if you can.
Murray Wills ZL2IQ
(Kiwi Contest Group ZM2K, ZL2K, ZL2NX)
>
> > Bruce Horn wrote:
> > >
> > > Hi,
> > >
> > > I'm trying to install a Network Interface Card in a 386 PC that has a
K1EA
> > > DVP board installed. According to the DVPTSR, the DVP board is
configured
> > > as IRQ=7 and base address=308H. When I configure the NIC to IRQ=10
and
> > > address=300H, the card fails its loop back test and cable connect
test.. If
> > > I remove the DVP card from the computer, the NIC passes both tests.
> > >
> > > Looks like I need help from someone who understands bus addressing
and
> > > interrupts better than I do. Any help would be appreciated.
> > >
>
> timely question. i am experimenting with an ethernet tsr to replace
> a comtsr for using ct over a network. just got it working with ethernet
> card set for irq-10 and addr 320h. this one is software configurable so
> changing it is pretty easy. i do have the dvp set for irq-7 and 308h,
> and
> just tried it with comtsr1 for packet and comtsr2 for the radio and lpt1
> for
> cw keying without any conflicts. now i have to get some more cards and
> try
> with more than 2 computers on the network.
>
> --
> David Robbins K1TTT (ex KY1H)
> k1ttt@berkshire.net or robbins@berkshire.net
> http://www.berkshire.net/~robbins/k1ttt.html
>
> --
> Submissions: ct-user@ve7tcp.ampr.org
> Administrative requests: ct-user-REQUEST@ve7tcp.ampr.org
> WWW: http://www.ve7tcp.ampr.org/Software/ct
> Questions: owner-ct-user@ve7tcp.ampr.org
--
Submissions: ct-user@ve7tcp.ampr.org
Administrative requests: ct-user-REQUEST@ve7tcp.ampr.org
WWW: http://www.ve7tcp.ampr.org/Software/ct
Questions: owner-ct-user@ve7tcp.ampr.org
|