My thanks to all those that supplied me with what these machine screws are..
I'll have a look for some new steel ones on flebay, or even amazon...
Much appreciated everyone!
73
Andy
http://gd0tep.com
-----Original Message-----
From: Amps <amps-bounces@contesting.com> On Behalf Of Jim W7RY
Sent: 08 July 2022 01:58
To: amps@contesting.com
Subject: Re: [Amps] VHF1200 6m cabinet hardware?
Agreed!
73, Jim W7RY
And no... They are not Spline....
On 7/7/2022 4:25 PM, gudguyham--- via Amps wrote:
> Just use a simple 6x32 sae screw about 1/4 “ long with a Phillips head in
> black oxide. Don’t bother with the Allen head it’s a PITA.
>
>
> Sent from the all new AOL app for iOS
>
>
> On Thursday, July 7, 2022, 4:47 PM, GD0TEP <gd0tep@manx.net> wrote:
>
> Hello to the group,
>
> I have a Command technologies VHF1200 6m amp.
>
> The amp itself is fine, but it's and I'm not the first owner, and I
> know it has seen some 'issues' over the years. Thus the covers have
> been off & on a few times. As such the screws are worn and I'd like to
> replace them. I'm talking about the little allan screws. They might
> be made of brass (or
> chocolate) as the allan holes are worn out, so they are next to useless.
>
> Does anyone know what thread size these might be please?
>
> 73
> Andy
> GD0TEP
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|