To: | amps@contesting.com |
---|---|
Subject: | Re: [Amps] Super Cathode Driven Tetrodes |
From: | Boye Christensen <oz7c@cool.dk> |
Date: | Wed, 31 Oct 2018 18:33:22 +0100 |
List-post: | <mailto:amps@contesting.com> |
Hi Can't any reason to drive a tetrode from catode ! How to control G2 voltage ? This will act as modulation of G1 + G2 G2 voltage has a big infunce on PWR out of a tetrode ! Most companies using tetrodes will use g1 input and a g2 stable voltage to catode ! 73 Boye On 29/10/2018 20:34, donroden@hiwaay.net wrote: Roger Miller or Glen Miller ? :-) Don W4DNR Quoting Ron Youvan <ka4inm@gmail.com>:On 10/28/18 20:40, Fuqua, William wrote:Now that this discussion has gone on for some time, and everyone has had a opportunity to read various articles, here is the question.Can anyone give me a reason why a cathode driven tetrode with the control grid connected directly tothe cathode be unstable. The screen grid is connected directly to ground. Lot mu grounded grid configuration.Sorry for typo error. Low mu.There should be no reason for this configuration be any less stable that the usual high-mu triode grounded gridamplifier, if fact should be more stable due to lower gain.I am not experienced with such non-normal tetrode usage, but it occurs to me that the screen grid (being much closer to plate) being misused in this way can have greater gain than the control grid in many tubes, like the suppressor grid in the 6AS6 pentode has more gain than the control grid. If so, the miller effect would be much greater. -- Ron KA4INM - Youvan's corollary: Every action results in unwanted side effects. _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps --- Denne e-mail blev kontrolleret for virusser af Avast antivirussoftware. https://www.avast.com/antivirus _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] Vox ssb, time for RF to appear ?, Bob Wilson, N6TV |
---|---|
Next by Date: | Re: [Amps] Fwd: Fwd: *** PGXL Questions on CW Operation, Bill Turner |
Previous by Thread: | Re: [Amps] Vox ssb, time for RF to appear ?, Bob Wilson, N6TV |
Next by Thread: | Re: [Amps] Super Cathode Driven Tetrodes, Bill Turner |
Indexes: | [Date] [Thread] [Top] [All Lists] |