On 2/14/2014 4:47 PM, Dan Michnay wrote:
You need resistors across each Cap as that equalizes the voltage across
them. With one bleeder only you may get unequal voltage across the caps
and one may react in an unfortunate manner
Dan
HI Dan
Oh yes - I knew that. I must have written it wrong. I'm going to
replace all 4.
It does seem to be working fine now. Been running it full bore in the
ARRL CW contest right now. Would like to just cut down the heat. 73
and thanks.
Tom W7WHY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|