Read this.
http://www.audiosystemsgroup.com/CoaxChokesPPT.pdf
Good luck!
73, Jeff ACØC
www.ac0c.com
-----Original Message-----
From: tzikas tzik
Sent: Tuesday, October 26, 2010 11:28 AM
To: Carl
Cc: amps@contesting.com
Subject: Re: [Amps] construct ferrite "line isolator"
thank you very much!
so material #43 ferrite is improper? i have not other material.
On Tue, Oct 26, 2010 at 6:44 PM, Carl <km1h@jeremy.mv.com> wrote:
> Ive used ferrites here for all sorts of RFI problems over the past 30 years
> or so; speaker leads, keyboards, monitors, telephones, touch and CFL lamps,
> common mode chokes on both ends of feedlines, auto ignitions, TV and VCR,
> and many other items. They always do the job as long as the right ferrite
> mix is used.
>
> Powdered iron is fine for tuned circuits and high power HF baluns where low
> loss is needed. Even Sevik woke up to that fact.
>
> Carl
> KM1H
>
>
>
> ----- Original Message -----
> From: "DAVE WHITE" <mausoptik@btinternet.com>
> To: <amps@contesting.com>; <dezrat1242@yahoo.com>
> Sent: Tuesday, October 26, 2010 2:39 AM
> Subject: Re: [Amps] construct ferrite "line isolator"
>
>
> Interesting. So I guess the question is "why?"
>
> Why would powdered metal work better? Is it more lossy at HF?
>
> cheers
>
> Dave G0OIL
>
> For what it's worth - I have found ferrites to be all but useless at HF
> for preventing RFI, even when used in large numbers. I have had much
> better success with powdered iron toroids.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|