Like Carl said...
http://www.wv7u.com/yc156amp/yc156amp.html
http://k8bow.w4zt.com/
http://k4zc.w4zt.com/
http://w7iuv.com/yc156.htm
http://k7rdx.w4zt.com/yc156/index.html
http://www.moonbounce.dk/hf_amplifier.htm
To name a few...
-Rex-
K1HI
Rex Lint
Merrimack, NH
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Peter Voelpel
Sent: Thursday, March 19, 2009 1:51 PM
To: 'Amps'
Subject: Re: [Amps] 4100VD 3CPX1500A7
I don´t know anybody who managed to built a 10-160m amp with the YC-156
73
Peter
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Carl
Sent: Donnerstag, 19. März 2009 17:29
To: sanorm@columbus.rr.com; amps@contesting.com; Jeff Allen
Subject: Re: [Amps] 4100VD 3CPX1500A7
Thats extremely easy to overcome with half the 10M coil before the Tune cap.
Big commercial amps have been doing that for decades and so are
YC-156 builders; it reduces the Tune C by 1/4th and easy for a vacuum
variable Some have even put the tube on 6M!
Carl
KM1H
----- Original Message -----
From: <sanorm@columbus.rr.com>
To: "Carl" <km1h@jeremy.mv.com>; <amps@contesting.com>; "Jeff Allen"
<jeff@kb9ysj.com>
Sent: Thursday, March 19, 2009 12:13 PM
Subject: Re: [Amps] 4100VD 3CPX1500A7
>
> Amp Guys,
> Just a comment on the YC-156 at 10M. The tank design is a little
> tricky for multi band operation
> (160-10) because of the 36PF PC. In the CT environment it was operated
> at a much higher F, however, it was a single dedicated Freq.
>
> de Norm N8NH
>
> ---- Carl <km1h@jeremy.mv.com> wrote:
>> 3CPX1500A7, a pulse rated 8877.
>>
>> Or go with the big boys and a YC-156. At 100W drive it will easily
>> run
>> legal with a bit of overhead AND last forever.
>>
>> Both tubes are readily available as medical amp pulls.
>>
>> Carl
>> KM1H
>>
>>
>>
>> ----- Original Message -----
>> From: "Jeff Allen" <jeff@kb9ysj.com>
>> To: <amps@contesting.com>
>> Sent: Sunday, March 15, 2009 4:18 PM
>> Subject: [Amps] 4100VDC@ 2 Amps
>>
>>
>> > What single Tube, GG can I use to get the best results from
>> > 160-10M?
>> > The
>> > amp is already built using 2 GS35B Tubes. But I think the 2 tubes
>> > are
>> > to
>> > unstable?? 4100VDC PLATE@2AmpsCCS PeterD
>> >
>> > _______________________________________________
>> > Amps mailing list
>> > Amps@contesting.com
>> > http://lists.contesting.com/mailman/listinfo/amps
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|