Amp Guys,
Just a comment on the YC-156 at 10M. The tank design is a little tricky for
multi band operation
(160-10) because of the 36PF PC. In the CT environment it was operated at a
much higher F, however, it was a single dedicated Freq.
de Norm N8NH
---- Carl <km1h@jeremy.mv.com> wrote:
> 3CPX1500A7, a pulse rated 8877.
>
> Or go with the big boys and a YC-156. At 100W drive it will easily run
> legal with a bit of overhead AND last forever.
>
> Both tubes are readily available as medical amp pulls.
>
> Carl
> KM1H
>
>
>
> ----- Original Message -----
> From: "Jeff Allen" <jeff@kb9ysj.com>
> To: <amps@contesting.com>
> Sent: Sunday, March 15, 2009 4:18 PM
> Subject: [Amps] 4100VDC@ 2 Amps
>
>
> > What single Tube, GG can I use to get the best results from 160-10M?
> > The
> > amp is already built using 2 GS35B Tubes. But I think the 2 tubes are
> > to
> > unstable?? 4100VDC PLATE@2AmpsCCS PeterD
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|