Amps
[Top] [All Lists]

Re: [Amps] crossmodulation in PA

To: "g3rzp@g3rzp.wanadoo.co.uk" <g3rzp@g3rzp.wanadoo.co.uk>,"amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] crossmodulation in PA
From: Bill Fuqua <wlfuqu00@uky.edu>
Date: Fri, 7 Sep 2007 09:40:42 -0400
List-post: <mailto:amps@contesting.com>
In the old days military sites had the receiving equipment and antennas a 
few miles away from the transmitting site to avoid a number of problems. 
Naturally receivers those days were easily overloaded by off frequency 
signals.

73
Bill wa4lav


At 04:46 AM 9/7/2007 -0400, Peter Chadwick wrote:
>Over the years, this has been a well known problem on ships at HF, 
>especially where they run full duplex telephony. Not that many do these 
>days in the commercial field, but the military have a lot of experience of 
>these effects. Somewhere I've a conference paper given some 20 odd years 
>ago from the UK MoD people on the subject, which told how they traced it 
>on anumber of ships. I remember them having a problem because in some 
>cases, below a certain power level it disappeared abruptly.. Fortunately, 
>the characteristics of tetrodes generally  make the transmitter  a 
>negligible contributor, but the external environment is another matter. 
>Worse at sea, of course because you've  got continuous corrosion!
>
>73
>Peter  G3RZP
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>