I was under the impression that you could have finer control over the
amp tuning if
you did things manually, so I was thinking of experimenting with the
Alpharemote to
get the best settings and then write a script file for HyperTerminal
that would upload
them as a sequence of text commands.
I guess I don't need to go to any of that effort, right?
73, Byron
Dick Green WC1M wrote:
>Byron,
>
>I've used the AlphaRemote software quite a bit. It's easy to operate the amp
>with the software, but I've not used it to remotely tune the amp. The
>program has controls for Tune, Load, Default and Enter, but doesn't
>duplicate the Tune procedure you can do from the front panel. Can you be
>more specific about using the remote option to program some setups? What do
>you have in mind? If you have the AlphaMax option, there's really no need to
>reprogram the tuning for different antenna setups.
>
>73, Dick WC1M
>
>
>
>>-----Original Message-----
>>From: ARS NZ3O [mailto:NZ3O@arrl.net]
>>Sent: Monday, April 04, 2005 7:30 PM
>>To: amps@contesting.com
>>Subject: [Amps] AlphaRemote Software
>>
>>
>>Has anyone used the AlphaRemote software, or a common
>>terminal program, to program the settings in an Alpha 87A?
>>After a station rebuild I have the serial connection working,
>>and remote gives me some more options for amp
>>placement,
>>but I'd like to use the remote option to program some setups. Think
>>that is easier?
>>
>>73, Byron
>>
>>
>>
>>
>>
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|