Byron,
I've used the AlphaRemote software quite a bit. It's easy to operate the amp
with the software, but I've not used it to remotely tune the amp. The
program has controls for Tune, Load, Default and Enter, but doesn't
duplicate the Tune procedure you can do from the front panel. Can you be
more specific about using the remote option to program some setups? What do
you have in mind? If you have the AlphaMax option, there's really no need to
reprogram the tuning for different antenna setups.
73, Dick WC1M
> -----Original Message-----
> From: ARS NZ3O [mailto:NZ3O@arrl.net]
> Sent: Monday, April 04, 2005 7:30 PM
> To: amps@contesting.com
> Subject: [Amps] AlphaRemote Software
>
>
> Has anyone used the AlphaRemote software, or a common
> terminal program, to program the settings in an Alpha 87A?
> After a station rebuild I have the serial connection working,
> and remote gives me some more options for amp
> placement,
> but I'd like to use the remote option to program some setups. Think
> that is easier?
>
> 73, Byron
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|