Hi Tom
You'll be able to get any parts (including lock nut set or copper
heat sink etc) of GS-35B from Pavel-UA1CBX at
pavel_popov <2219428@CryptoHeaven.com>
He has large amount of russian tubes/parts. I purchased 10 sets
of GS-35B by Ebay and he sent tubes and heat sinks separately.
Unfortunately some of heat sinks with lock nut sets were lost
in postal problem. But Pavel sent them real quickly. He mentioned
that he had a lots of heat sinks or lock nuts with him.
I hope this will help you.
---------
Tack Kumagai JE1CKA/KH0AM
JE1CKA <je1cka@jarl.com>
In message "[Amps] looking for gs35b heat sink nut"
on 04/06/19, "Thomas Hix" <w4th@hotmail.com> writes:
:
: Hi guys....Do any of you happen to have the large nut that holds the
: copper heat sink on the top of a GS-35B that you dont need?
: A guy contacted me looking for one, but all the ones I have are
: needed for the tubes with which they correspond.
: If you do have a spare you would part with, please let me know.
: Thanks for your time.
: Tom....W4TH
:
: Tom's Tubes: Specializing in Amateur Radio Amplifier Tubes/Sockets & G3SEK
: Tetrode/Triode Boards & Kits http://www.tomstubes.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|