Excellent, thank you for the referral, I will check them out.
KRS
----- Original Message -----
From: John T. M. Lyles <jtml@lanl.gov>
To: <amps@contesting.com>
Sent: Monday, March 05, 2001 7:52 AM
Subject: [AMPS] metal fabricators for rf decks
>
> Precison Metal Fabricators, now Proline Metal Fabricators, is a
> favorite vendors for semi-custom chassis kits around here. You put
> together whatever size chassis you want, all supplied in nice
> Irridite coated aluminum pieces. We have built very big and heavy
> chassis using their parts and a few pieces of cut 1 inch square
> aluminum bar stock for extra strength. One holds a 3 kW water cooled
> 805 MHz solid state amplifier we built, and another holds a 5 kW
> ramped filament power supply for a big tetrode amplifier. It has
> about 80 lbs of iron in it, and can be lifted by the handles on each
> end. You can see it on K7IUVs amplifier photo pages, under my
> submission, the "2 x TH555A" power amplifier. Its the
> "front_view_fil_ps" photo.
> http://www.angenent.org/W7IUV/k5pro/k5pro.htm
>
> Heres the link to PMF:
> http://www.gotopmf.com/
>
> I don't know about them building RF decks, but I am sure you could
> cut the slots and holes for whatever component layout you needed. You
> can also box things up using the PMF pieces. It is difficult to
> figure out their kitting from the website, so a telephone call to
> their saleperson will help. I think they use Visa card too.
>
> 73
> K5PRO
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|