So it was written...
> ckeck my math but .
>
> 1 mm = 1/254 inch = 0.0039370 inch
WRONG! WRONG!WRONG!WRONG! 1 mm = 1/25.4 inch = 0.03937 inches
There are 25.4 mm per inch! I always figure "40mils (milli-inches)
per mm."
> >From ref data for radio engineers for enam wire => #39 AWG"
So 0.040" would be way bigger than #39!
73,
George T. Daughters, K6GT
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|