Someone here was asking for the pinouts of the 4CX600JA. It's not at all
like a 4CX250. Pin 1 and the base ring are the screen. Pins 2, 4 and 7 are
the control grid and pins 3, 6 and 8 are the cathode. Pin 5 and the centre
pin (the spigot which is the grid connection in a 4CX250) are the heater
connections. I have an Eimac data sheet if anyone wants more information.
Nice tubes if you can get the SK-607 sockets.
John Nelson
GW4FRX.
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|