Writelog 11.10 has worked flawlessly in my present setup for a year now. Today I experience loss of rig control after 1 or more qso's . Sometimes and hour or two of operation is possible at other tim
I had some similar problems. If you have usb to serial adaptors make sure they have the FDTI chip set. Prolific chip sets don't work with WL and 64 bit windows 7, etc. Your rig control also needs a
I found it necessary to use usb adaptors with the FDTI chip set. The Prolific adaptors did not work with Writelog. Besides the good suggestions posted This was posted on another reflector about the U
I just upgraded (downgraded) from version 11. On Installing, the various ports are recognized. In ports my rig (IC-7600) is recognized with the right comm port number baud rate etc. I can even cha
Al, I just wanted you to know that I have the same problem. No frequency from the rig is reported to Writelog. I can change the frequency from the menu, thus there is communication between Writelog a
Have you tried running the program in compatibility mode. Most versions of windows have comparability mode. 73 de Frank, N8WXQ That probably doesnt help much, but now you know WL will run on Win11.
I am trying to set up the writelog to properly key an IC 705. Owners of the IC-7300 many also be able to help as these radios are similar. The version of Writelog is the latest one. Radio connection
Those who have an IC-7610 or IC-7300 may help as well as these radios are similar. I have not been unable to get WriteLog to key CW correctly using the USB cable to the radio or by using a Winkeyer2