Scott, I have not tried one but the Turtle Beach "Audio Advantage Roadie" www.turtlebeach.com/site/products/audioadv/roadie/producthome.asp appears to have the right stuff ($80 - new). It is also lis
Richard, I have a SoundBlaster Live 24 External setting on the shelf. The one issue with the Live 24 External is that you cannot use the mic and line inputs at the same time (connecting the mic will
Scott, A follow up ... Both the Creative MP3+ (discontinued but sometimes available factory refurbished from the Creative Labs Factory store on e-Bay for $15 http://stores.ebay.com/Creative-Labs-Fact
Sorry folks ... it's UA-580. The link below is correct - I was sloppy with the text. 73, ... Joe Subich, W4TV microHAM America http://www.microHAM-USA.com http://groups.yahoo.com/group/microHAM suppo
Check the MMTTY Plug-in -> Setup MMTTY -> TX Tab. Look in the upper left corner and make sure that DIDDLE is not set to "NONE" 73, ... Joe, W4TV _______________________________________________ WriteL
Correct - Windows NT, Windows 2000, Windows XP require a third party LPT driver. Here is the information from the writelog web page: www.writelog.com/support.html LPT ports with Windows 2000/XP Write
10.62h ... Don simply made a typo. The software FSK works well with microKEYER USB Interface II (shameless plug!) - I will be updating the configuration guide for USB II and Writelog over the next we
An "oldie but goodie" - if you can still find it - is the Creative SoundBlaster MP3+. It also scores 7F on the WriteLog SB check. They are often available from the Creative "eBay Store" refurbished.
Writelog does a "reset" on WinKey when starting. If you have your dots on the right paddle, Writelog will be reversed. Normal wiring of paddles/keyers is dot = left = tip. 73, ... Joe, W4TV _________
Brian, Unfortunately, RTTYrite uncovered a problem with most USB drivers and FSK. That issue was resolved 10.59. However, due to buffer issues in most USB virtual serial port drivers (including the l
Jim, Do you have the correct CI-V address set in WriteLog and the IC-706mkII? If I recall correctly (and I'm not an Icom user) you will need to set an address override for the IC-706mkII if you are u
Bob, You are in the very same place as W4WX ... the FT-450 CAT Manual indicates the very same commands as the FT-2000 but WriteLog is not hearing from the FT-450 using the FT-9000 protocol. Bill has
Search the help file for CommSlot= ... that will fix your issue with access to enough rig control and CW/PTT ports. Windows NT and descendents (Windows 2000, XP, Vista) do not permit direct access t
If the USB devices are assigned a (virtual) serial port, the manufacturer has a real problem. Windows XP (and Vista) has native USB support for USB mice, keyboards and headsets - it is HID (Human In
K1EL makes two CW only keyer kits ... the original WinKey is an RS-232 interfaced keyer and the newer WinKey USB is a USB interfaced device with updated keyer. Neither of the K1EL devices provide rad
Disable PTT in WriteLog when using the Signal Link USB. Signal Link generates its own PTT using an internal "VOX" and that PTT must be applied to pin 9 of the ACC2 jack. PTT on pin 9 will mute the mi
Bill, In my testing the WriteLog and the FT-2000 work together just fine with this specific configuration: 1) Set WriteLog for FT-9000 2) Set WriteLog "Baud rate" to 4800 (do not use Auto) 3) The cab
microHAM Router 5.0.0 with Vista support is now available for at: www.microham.com/Downloads/urouter_release_05_00_00.exe To install Router 5.0 to a system with a previous version of Router: 1) Backu
Ted, The SoundBlaster Audigy SE most certainly does not score 7f - among other problems it has only a single analog input jack. It may be used for either mic or line but requires swapping cables to g
If your radio is an IC-706MKII or IC-706 MKIIG you will need to either enter an override for the CI-V address in Writelog.ini (See the help file under [RIGS]) or change the CI-V address in your rig t