microHAM Router 5.0.0 with Vista support is now available for
at: www.microham.com/Downloads/urouter_release_05_00_00.exe
To install Router 5.0 to a system with a previous version of Router:
1) Backup your presets (Router | Backup Router Settings)
2) Delete all Virtual Ports (Virtual Port | Delete All)
3) Close Router (Router | Exit)
4) Unplug the USB cable from your interface
5) Download the new Router from:
www.microham.com/Downloads/urouter_release_05_00_00.exe
6) Run the downloaded Router file - it will uninstall any
previous version of Router and restart your computer
before installing the upgrade.
7) Connect the USB cable to the interface
8) Manually upload the new firmware file (Device | Upload Firmware)
if Router does not prompt you to do so (not applicable to USB
Interface II).
9) Reload your presets (Router | Restore Router Settings)
10) Reselect your radio (microKEYER, MK2R/MK2R+ only)
11) Adjust/modify your presets as needed to adjust for the
changes in Router 5.0 and save the updated presets.
12) Save your new "Power-up" settings (Device | Store as Power-up
Settings) - (not applicable with USB Interface II)
13) Update your "Router Back-up" (Router | Backup Router Settings)
14) Have fun exploring Router 5.0!
Updated English manuals for all interfaces are available from:
www.microHAM-USA.com/downloads.html.
microKEYER II is now shipping:
www.microHAM-USA.com/products.html
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support@microham.com
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|