hi, I received my Studio One microphone today but am having a hard time getting the settings right for the best audio quality. Does anyone have any recommendations how to configure the Jupiter to han
Jason, The monitor output on the Jupiter and Pegasus doesn't reflect any TX audio adjustments. You need to listen to yourself in another receiver, or get on-air feedback from others. 73, Mark _______
Author: Robert & Linda McGraw K4TAX <RMcGraw@Blomand.Net>
Date: Sat, 11 Oct 2003 08:00:23 -0500
Better yet, turn off the speech processor, set the rolloff to have minimum effect or none, set the TX bandwidth to 2.4 KHz. Adjust the mike gain so that the ALC just begins to indicate ALC action. Ru
Set the rolloff at 100hz and the transmit band width to 3000. The will give you a 2900 transmit bandwidth. If people tell you your too bassy raise the roll-off up to say...200hz. Dont expect the Stud
John, If you look at the schematic for the Pegasus (so I assume the Jupiter as well), the front and rear inputs go through identical input circuitry so that there is no advantage to one over the othe
Jason Buchanan wrote: I received my Studio One microphone today but am having a hard time getting the settings right for the best audio quality. Many thanks to those who replied - I have hopped aroun
hey jason you got a reciever that works on the hambands besides the jupiter? don't forget to turn down the rf gain? -- -- Original Message -- _________________________________________________________