I don't know. I do know that Will decided he didn't want to run it anymore. I never could here him on 20 m anyway. I tried though. Hope to hear you in there next week. 73 John / N0KHQ / St. Louis Alw
Does the new version work? 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- StripMime Report -- processed MIME parts -- multipart/alternative text
The 7.288 Ten Tec Net is every Sunday at 7pm central time. The net is hosted by Jerry KO4CH. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- Stri
Hit ALT then TUNE and you can use what ever power you want to. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- StripMime Report -- processed MIME
ver 1.23 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'um better than you can buy 'um. -- StripMime Report -- processed MIME parts -- multipart/alternative text/plain (text body
Hello, I think I may hold the world record for fast service at Ten Tec. I received the antenna tuner for the Jupiter Tues. night...I thought I had installed it properly......but I didn't. Needless to
Yes, I have installed the tuner in the Jup. it is not difficult at all.......BUT WARNING. Call Garry at Ten Tec. the installation instructions are not as good as they could be. If you don't talk to G
Hi Mike, I have the Ameco PT-3 and use it with the Jupiter. The Ameco is an "inline" receive preamp (1.8 through 54.0) complete with transmit delay, tune control and gain control. The PT-3 will handl
I've got ask........why are you selling the tuner. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'em better than you can buy 'em. Visit www. Hamuniverse.com - then click on Antenn
The one on 7.251 is at 5pm central time. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'em better than you can buy 'em. Visit www. Hamuniverse.com - then click on Antennas _______
Set the rolloff at 100hz and the transmit band width to 3000. The will give you a 2900 transmit bandwidth. If people tell you your too bassy raise the roll-off up to say...200hz. Dont expect the Stud
No problem on this end after dumping 1.25 in the Jup. You might try reloading the update. I wish TT would write the necessary programming that saves all user settings when the rig is powered off. It
Your wiring idea looks good. Use RED for PTT. You cant hurt anything as long as you stay away from Pin 4 on the 4 pin din plug. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'em b
If you measure the continuity between pin # 2 (ground) or the mic connector to the grounding lug on the rear of the radio you will find that there is approx. 6 ohms of resistance. I had to use very s
Well, thank you Bill. If owners of Jupiter's and Orion's would get their ohm meters out and check their rigs as suggested in an earlier email they will find, on the Jupiter approx. 4 ohms of resistan
The "T" stands for "Auto-Tuner Engaged" Check your main menu. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'em better than you can buy 'em. Visit: http://www.hamuniverse.com/ante
Turn the unit off then back on. If the condition persists do a "Reset". You should be running ver.1.26 on the rig. Hope this helps. If not, let me know. I dont want to start anything on the reflector
Thanks Tim. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'em better than you can buy 'em. Visit: http://www.hamuniverse.com/antennas.html ________________________________________
Its good to see that I'm not the only one that has issues with the 238. I have replaced the pilot lamp at the SWR meter numerous times. The elastic is shot. One question I do have is, how can the sen
I noticed that the Jupiter isn't listed. 73 John / N0KHQ / St. Louis Always on 17M Antennas: You can build 'em better than you can buy 'em. Visit: http://www.hamuniverse.com/antennas.html ___________