Anyone had problems with WEP and ubicom? We use 64-bit encryption on base stations but ubicom device with encryption enabled does not see station (and station does not see ubicom device). What might
YES :(((( We are complaining to KarlNet on this for months. We recieved several 'internim' firmwares but none of them really fixes the problem. Solution is to have high-fligh flashrom base station i
happens? was turned off. I've talked few times with karlnet tech support about this. They do not have the idea why this is happening or they are just playing dumb (or both). Pooling is performing mu
hypothetical Well, we were using Flashrom units until recently and the ARE best preforming. BUT! First problem with them is problem of space - you don't have allways enough space on the roof for the
Hi all, can anyone advise about purchasing right kind of 5.x GHz equipment that can (or will in near future) work with TurboCell ? Thanx. Ivan Romanic MadNet wireless networking provider Jadranska 17
Anyone noticed that there are no more option for Sx-4000 licenses on license-it.com?? Am I missing somethings? Why cant you buy Sx-4000 anymore??? greetings, Nenad ___________________________________
Well take a look for yorself... http://www.madnet.co.yu/obrisati/license-it1.jpg http://www.madnet.co.yu/obrisati/license-it2.jpg You'll see that there is no Sx-4000 licenses on the list?! greetings
Exactly, KarlNet fell far behind from where they were 2 years ago. Contiunous glitches with their software/hardware, lack of low-cost CPE solutions, totaly overpriced software... I really don't know
Really? And do that features work? NOT! NAT? We had to turn of NAT on all of our clients long ago because they had most unbelievable problems with it. Routing? Quote from Karlnet support: "Why did y
Hi everyone, we have very strange issue with one of our base stations (SG-4250, 8 user v4.44-02). From time to time it locks up without any obvious reason. We can ping the station and it is respondin
Hi Dan, yes I can do link test from client side to base station and vice versa, but client won't register on base station. Ivan Dan Metcalf wrote: I Have a similar issue on an ap-1000, can you do a w
I can do a link test from client side to base station, but I can NOT ping it from client side. When I approach base station trough ethernet port I can see all clients in TurboCell list but I can NOT
Don't know what type it is, but it isn't KN-50 board. We bought it from CWW labs last june, they are in black plastic enclosure without any markings. Didn't have much luck with them. One died after 7
Outside there is 4 leds (Pwr, Diag, Lan Wlan), on side there is SMA/RP antenna connector, LAN connector, 5VDC connector and handy plain/cross lan cable switch. Are those hawking boards ? Dan Metcalf
Looks like I will have to remove that one Ubicom board and see if anything changes Dan Metcalf wrote: Yeah - they come in the black plastic case --Original Message-- From: karlnet-bounces@WISPNotes.c
I've managed to push 1.5MBit/sec (cca 150 kbyte/sec) with hawking board. dan.metcalf@wbsysnet.com wrote: Whats the max throughput anybody has pushed through a KN50? Thanks, Dan --Original Message-- F
Anyone noticed that there are no more option for Sx-4000 licenses on license-it.com?? Am I missing somethings? Why cant you buy Sx-4000 anymore??? greetings, Nenad ___________________________________
Well take a look for yorself... http://www.madnet.co.yu/obrisati/license-it1.jpg http://www.madnet.co.yu/obrisati/license-it2.jpg You'll see that there is no Sx-4000 licenses on the list?! greetings
Exactly, KarlNet fell far behind from where they were 2 years ago. Contiunous glitches with their software/hardware, lack of low-cost CPE solutions, totaly overpriced software... I really don't know
Really? And do that features work? NOT! NAT? We had to turn of NAT on all of our clients long ago because they had most unbelievable problems with it. Routing? Quote from Karlnet support: "Why did y