We have been testing Orinoco (gold and silver) cards with 100mW, 200mW Mikrotik and 250 mw Teletronics cards on our Turbocell POP set to AP plus mode (Karlnet NDIS drivers, among their other end-user
I asked just this question to the Karlnet people at the WISPCON show. I intentionally asked this question very clearly to make sure that I understood. I was told that Turbo ISP basestation FlashROM w
Thanks for the update on additional users. This means per radio with multiple radios in a FlashROM unit? Larry, We are working to get the unit to support MORE users. This is an issue of programming a
One thing I would really like to see is a good Karlnet implementation that will work via USB (i.e. the USB unit with a Gold Card inside from Orinoco). It seems I was told at WISPCON in March that a U
Norm: I just received my 200 mW cards this week. I'm currently configuring a Karlnet FlashROM ISP basestation and hope to be testing on Monday. I will obviously be testing w/Orinoco cards and with 20
I am configuring a PC with a flash ROM (this is my first time) and am attempting to follow Karlnet's "Loading Firmware to the FlashROM" instructions. Configuratior is not asking me to enter the seria
Ill be working on this tonight, thanks for the help. Also, Reggie and Doug from Karlnet said they'd talk me through a coupla' things in the AM. Did you get it figured out yet, Barry? I don't know exa
All Clear has been testing two 200 mW cards purchased from MikroTik at our first tower--cell tower 300', Comet 12.4 dbi Omni antenna, YDI power amp is also on top (15 dbi gain))--we are running Turbo
We've been testing 2 cards (200 mW) from MikroTik with some Poynting antennas (8 & 13 dpi Patch and 12 dbi Yagi) and have been pleased, so far. Barry Whitcomb --Original Message-- From: karlnet-admin
No, I haven't--but I will. Is there a url that I can go to to check? As nearly as I can tell (the type is a little small): FCC ID: NI3-2511CD-PLUS2. Have you looked up the FCC ID to see if it is actu
Thanks, went to url. It is Senao card. Cert granted 4/26/2002. Barry ISB (especially problems (I _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://list
A USB unit (similar to the Agere/Orinoco) that would support the higher powered Prism cards would be a good and simple CPE for some installations. It would allow for being placed nearer the antenna,
I was thinking about this over the weekend. Would USB 2.0 standard improve the throughput. It seems that USB 2.0 is finally starting to catch on in the marketplace. From reports (but no direct experi
I gave out some misinformation last week. We have installed our first Turbocell ISP base (FlashROM--to 300' tower with YDI amplifier and 12.4 dbi Comet Omni) and all seems well. We've been testing bo
Barry, The Prism II cards are not supported with the NDIS driver. I am sorry if I steered you in the wrong direction. Our current software supports these cards in the Flashrom only. The 802.11b(AP+)
Glad to see you're getting things working. How do you know if you've got line of sight at 20 to 31 miles? As an update, my tower stuff went up this week. There's an interference problem with the thre