I was thinking about this over the weekend. Would USB 2.0 standard
improve the throughput. It seems that USB 2.0 is finally starting to
catch on in the marketplace. From reports (but no direct experience) I
understand that it's much more robust in addition to being far faster.
Barry
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Kevin Knuth
Sent: Friday, May 17, 2002 10:42 PM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] Karlnet for USB!
All,
This is an interesting thread!
Karlnet has been researching the USB possibilities for some time.
I was involved in such a meeting this past week, and I would appreciate
opinions on what we heard:
We can get TurboCell to work on USB devices (not yet, but certainly
doable). Here is the catch: USB protocol causes latency that will have
an adverse affect on TurboCell. Our belief, is that instead of getting
5.5megs through the link, you will probably slow your ENTIRE TurboCell
network down to about 3.2Megs.
SO.....tell me what you think, and I will pass that back to the
engineering staff!
Kevin
*************************************
Kevin R. Knuth
Regional Business Development Manager
614-822-5275 Corporate Office
260-424-9690 Home Office
260-402-6086 Cell
www.karlnet.com
*************************************
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of barrywhitcomb
Sent: Friday, May 17, 2002 3:28 PM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] Karlnet for USB!
A USB unit (similar to the Agere/Orinoco) that would support the higher
powered Prism cards would be a good and simple CPE for some
installations. It would allow for being placed nearer the antenna, with
a medium-length run of USB cable into a PC that wouldn't have to be
opened.
Doug, you and I corresponded about this last week, I think, with the
discussion centering on how Agere (then Lucient) had purchased the
driver from another source. You mentioned problems getting much speed.
Frankly, with Prism code being more open, I'd rather see a Prism USB
solution, If the Karlnet people think it's practical. With the Agere USB
stuff selling for around $100 with radio card--maybe adding an antenna
and a medium USB cable run would keep CPE simpler and reduce costs.
Barry Whitcomb
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of admin
Sent: Friday, May 17, 2002 4:02 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] Karlnet for USB!
I think it's worthwhile. There are certain people I dont care to monitor
anything other than signal and dont need a full blown ethernet solution.
$25-$35 per lic. would be cool.
---------- Original Message ----------------------------------
From: Scott Stevens - WISP Notes <wspnote@scottstevens.net>
Reply-To: karlnet@WISPNotes.com
Date: Fri, 17 May 2002 12:27:11 -0600
>I'd like to hear the lists opinion on what they'd pay for karlnet on
>USB (similar to NDIS client driver) and if you think it is worthwhile??
>
>--
>Scott Stevens
>800-815-4682
>scott@scottstevens.net
>
>orders@scottstevens.net
>support@scottstevens.net
>"Always on E-Mail and 24/7 Support"
>
>
>
>_______________________________________________
>Karlnet mailing list
>Karlnet@WISPNotes.com
>http://lists.wispnotes.com/mailman/listinfo/karlnet
>
--
Eric L. Johnson
WarpSpeed Internet
1-361-563-3742
--
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|