[Skimmertalk] Fwd: Red Pitaya + Skimmer Server only receiving on lowest band

[Bob Wilson, N6TV]

On Mon, May 21, 2018 at 12:22 PM, N4ZR <n4zr at comcast.net> wrote:

> For those of us who are Unix-challenged, how does one *un*install Pavel's
> latest release in order to install 0305?  I have a Red Pitaya that is on
> its way to EL2BG as soon as I can validate its running here, but I
> installed the latest release and it is not running.
>

   1. Terminate Windows any Windows programs using the Red Pitaya
   2. Use PuTTY on Windows to open an SSH session on the RP's IP address or
   name (rp-f0xxxx.local where xxxx is the MAC address of the RP)
   3. Enter the following commands to change to the install directory, stop
   the running SDR, and close the window
   cd /opt/redpitaya/www/apps/sdr_receiver_hpsdr/
   ./stop.sh
   exit
   4. Open your Windows web browser to the Red Pitaya URL or IP address,
   e.g. http://rp-f0xxxx.local/
   5. Click on the green *Application Marketplace* icon
   6. After a short pause, you'll see long list of application icons at the
   URL http://bazaar.redpitaya.com/
   7. Scroll down to the bottom, look for *SDR receiver compatible with
   HPSDR* (careful, there are many with similar names)
   8. Click *Uninstall* (below the icon) and wait
   9. Click *Install*, then Run and test.

Once testing is complete, click *Stop* and verify that a clean power off
and restart automatically launches the receiver app, as explained here
<http://hamsci.org/n6tv-red-pitaya-combine-cw-rtty-skimmer-hdsdr>, under
"editing /etc/rc.local"

> Is it the case that with later releases Skimmer Server identifies the
> receiver as "unidentified HPSDR receiver" rather than as Red Pitaya such
> and such?
>
I have not seen that reported yet.

73,
Bob, N6TV