[Skimmertalk] No visible callsign list in CW Skimmer ?

[Andrew O'Brien]

Interesting , I did change the ini file to
CallsDialogLeft=0
CallsDialogTop=0

My INI file had more precise position instructions.   However, still no
viewable callsign list.  The ini file changed from the LEFT/RIGHT = 0    to
now

CallsDialogWidth=259
CallsDialogHeight=631
CallsDialogVisible=1

I'll poke around some more...

Andy

On Thu, Nov 23, 2017 at 11:20 PM, Andrew O'Brien <k3ukandy at gmail.com> wrote:

> Thanks, I only have one monitor BUT used to have two.  I'll change the ini
> file and see if that fixes things
>
> Andy
>
>
> On Thu, Nov 23, 2017 at 9:23 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>
>> Perhaps I misunderstood your question. If you toggle *View* -> *Callsign
>> list* in the CW Skimmer menu, you should see a window open and close.
>> Perhaps it has moved to the left or right edge of the screen or to a second
>> monitor, and you're having trouble seeing it.
>>
>> If you still can't find it, select *Help* -> *Data Folder*.   Edit
>> *CwSkimmer.ini*.  Exit from CW Skimmer.  In the CwSkimmer.ini file, look
>> for these lines and change them to:
>>
>> CallsDialogLeft=0
>> CallsDialogTop=0
>>
>> Save the change to the .ini file and restart CW Skimmer.  The callsign
>> Windows should now be quite visible.
>>
>> 73,
>> Bob, N6TV
>>
>> On Thu, Nov 23, 2017 at 9:10 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>>
>>> From the CW Skimmer menu, select *Commands* -> *BLIND Mode*, and make
>>> sure that it is NOT checked.
>>>
>>> BLIND mode was created for folks who are operating a contest in the
>>> "Unassisted" category, where using a waterfall display is OK as long as no
>>> automatically decoded callsigns are displayed.
>>>
>>> 73,
>>> Bob, N6TV
>>>
>>> On Thu, Nov 23, 2017 at 8:18 PM, Andrew O'Brien <k3ukandy at gmail.com>
>>> wrote:
>>>
>>>> I am no longer able to see the callsign list in CW Skimmer, everything
>>>> else
>>>> is working as expected.  I checked for hidden windows , examined the
>>>> task
>>>> view etc, but no sign of it.  I am using a fresh install of CS Skimmer
>>>> 2.0
>>>> .  Callsigns ARE being received and displayed on the right side panel ,
>>>> just not in the usual list.   Running Windows 10 .  Any suggestions ?
>>>>
>>>> Andy K3UK
>>>> _______________________________________________
>>>> Skimmertalk mailing list
>>>> Skimmertalk at contesting.com
>>>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>>>
>>>
>>>
>>
>