[Skimmertalk] CW Skimmer Telnet command to set sampling rate?

Andy KU7T ku7t at ku7t.org
Thu Oct 6 09:52:42 EDT 2016


I may be missing something, but why don't you use a 7 band QS1R and connect
to local telnet port with your logging software?

Andy
KU7T

-----Original Message-----
From: Skimmertalk [mailto:skimmertalk-bounces at contesting.com] On Behalf Of
Bob Wilson, N6TV
Sent: Thursday, October 6, 2016 1:10 AM
To: Dick Green WC1M <wc1m73 at gmail.com>
Cc: skimmertalk <skimmertalk at contesting.com>
Subject: Re: [Skimmertalk] CW Skimmer Telnet command to set sampling rate?

Both Writelog and HDSDR support OmniRig, and HDSDR will synchronize your K3
VFO A frequency with the HDSDR cursor, if that's what you're looking for.

73,
Bob, N6TV

On Wed, Oct 5, 2016 at 3:00 PM, Dick Green WC1M <wc1m73 at gmail.com> wrote:

> Thanks, Pete.
>
> Stopping CW Skimmer, editing the file and restarting is a bit awkward, 
> but possible. One problem is that I'd have to hit the Run button after 
> the restart. Perhaps I'll send an enhancement request to Alex :-).
>
> SkimScan is neat, and I think it would work with my equipment, but 
> it's not what I'm looking for.
>
> I'm attempting to create an Assisted SO2R station that only uses local 
> copies of Skimmer for spotting. Of course I could use the RBN or a 
> combination of RBN and one or more local Skimmers, but I like the idea 
> of an all-local system that only spots what my station can hear. It's 
> still Assisted (by a definition I helped create),  but it feels more 
> like something between Unassisted and Assisted: no other human ops
involved.
>
> I started out with an Afedri 822x, which is the dual-channel model. 
> The dual-channel seemed like an attractive way to monitor the antennas 
> on each of my two K3s, using a splitter and RX OUT/RX IN, a design 
> suggested to me by N6TV.  This approach frees me from the limitations 
> of IF-based solutions. I like the Afedri's combination of network and 
> USB access at a reasonable price. Unfortunately, the dual-channel 
> implementation doesn't work with CW Skimmer (both I/Q streams are 
> muxed into 4-channel audio) and while there's a Skimmer Server plug-in 
> for the dual-channel Afedri, it always assigns the lowest frequency to 
> channel 0, which would force me to always have the attached K3 on the
lowest frequency band.
>
> So, I returned the 822x and bought two single-channel Afedri SDR-Net 
> units. In this case, it's possible to run separate instances of HDSDR 
> and CW Skimmer for each SDR and route the spots via Telnet into 
> Writelog. It works really well, but frequency changes are problematic. 
> I want the LO to be fixed in the center of the sample rate (e.g., 
> 7,048,000 Hz when on 40m with a 96K sample rate), not following the 
> rig frequency (which moves the scan window, like IF mode). The only 
> way to do that is to manually change the frequency in HDSDR (or the 
> Adfedri SDR-Net Control Box program) and also in CW Skimmer. The 
> Afedri SDR-Net Control Box program can send the frequency to Skimmer 
> via Telnet, but the frequencies for each band are fixed and not what I
want.
>
> So, I modified my antenna-switching software, AntennaMaster (AM), to 
> set the SDR LO via an Adfedri-supplied program and the CW Skimmer LO 
> via Telnet. This works great. In fact, it works so well that I'm 
> considering getting two more SDR-Net units to operate independently of 
> the K3s on unused antennas for other bands. That would give me Skimmer 
> on four bands simultaneously (of questionable value at this point in 
> the solar cycle, but what the heck.)
>
> The only thing I can't do is set the Skimmer sample rate. I'd like to 
> do that so the scan window is optimized for the size of the band. Say, 
> 48K on 30m, 96K on 40m, 192K on 20m, 15m and 10m, etc. Probably not 
> really necessary, but nice to have.
>
> The other thing I'm looking to do is communicate with HDSDR via its 
> DDE interface so I can set it's frequency from my program too. But 
> I've been unable to find any documentation on that interface. Anyone 
> know where I can find it?
>
> 73, Dick WC1M
>
> -----Original Message-----
> From: Pete Smith N4ZR [mailto:n4zr at contesting.com]
> Sent: Wednesday, October 5, 2016 10:55 AM
> To: skimmertalk <skimmertalk at contesting.com>
> Subject: Re: [Skimmertalk] CW Skimmer Telnet command to set sampling rate?
>
> Dick, to the best of my knowledge, the only Telnet commands 
> implemented are those shown in the "Telnet Commands" section of the CW 
> Skimmer Help file - which does not include a sample rate command. The 
> CW Skimmer.ini file has a section for each type of radio.  The one for 
> the SoftRock looks like this:
>
> RigNo=1
> [sdrSR]
> SignalRate=96000
> CenterFreq=14040000
> CenterOffset=0
>
> Since the ini file specifies the sample rate (signal rate), it should 
> be possible to create a batch file that would stop the software, edit 
> the sample rate to a new value, and restart.
>
> You don't mention if you are using one of the multi-band Softrocks, 
> but if so you might want to look at SkimScan SR by W3OA, to be found 
> at http://dickwilliams.byethost17.com/SkimScanSR.html?i=1. While it 
> does not provide for changing the sample rate, it offers the ability 
> to band-hop on a variety of user-programmed schedules.  It's a very clever
piece of work.
>
> 73, Pete N4ZR
> Download the new N1MM Logger+ at
> <http://N1MM.hamdocs.com>. Check
> out the Reverse Beacon Network at
> <http://reversebeacon.net>, now
> spotting RTTY activity worldwide.
> For spots, please use your favorite
> "retail" DX cluster.
>
> On 10/5/2016 3:06 AM, Dick Green WC1M wrote:
> > Hello all.
> >
> >
> >
> > Is there a Telnet command for CW Skimmer to set the Sampling Rate in 
> > SoftRock mode?
> >
> >
> >
> > I'm able to use the SKIMMER/LO_FREQ command to set the LO frequency, 
> > but there doesn't seem to be a similar command to set the sampling 
> > rate. Is it unimplemented or just undocumented (I should be so lucky.)?
> >
> >
> >
> > 73, Dick WC1M
> >
> >
> >
> >
> >
> > _______________________________________________
> > Skimmertalk mailing list
> > Skimmertalk at contesting.com
> > http://dayton.contesting.com/mailman/listinfo/skimmertalk
> >
>
>
>
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>
_______________________________________________
Skimmertalk mailing list
Skimmertalk at contesting.com
http://dayton.contesting.com/mailman/listinfo/skimmertalk



More information about the Skimmertalk mailing list