[Skimmertalk] IBP beacon by CW Skimmer

Dai NAGAKURA ndai at cameo.plala.or.jp
Mon Feb 2 00:23:27 EST 2015


Sorry,suspicious attached is not reflected, Here is my Watch.lst

In file, only IBP stations is discribed,

4U1UN
VE8AT
W6WX
KH6WO
ZL6B
VK6RBP
JA2IGY
RR9O
VR2B
4S7B
ZS6DN
5Z4B
4X6TU
OH2B
CS3B
LU4AA
OA4B
YV5B


Dai JF2IWL

On Mon, 02 Feb 2015 14:01:03 +0900
Dai NAGAKURA <ndai at cameo.plala.or.jp> wrote:

> Thank you Bob for kind advise.
> 
> I found my miss Watch.lst shall be placed hidden UserData folder.
> and set CW Skimmer following your advice.
> Then CW Skimmer started to decode beacons.
> ( It's difficlt task for CW Skimmer as you say ,like W6WXT,OA2IGY etc)
> 
> But CW Skimmer does not send to Aggregator although it's true callsign.
> Pse see attatched my Watch.lst. This is displayed "LST file " on Windows.
> Is this right?
> As I use CW Skimmer and WinXP, 
> I cannot find BandPlan.in or related file in my PC
> 
> I will try more.
> Thank you.
> 
> Dai JF2IWL
> 
> 
> On Sun, 1 Feb 2015 14:39:41 -0800
> "Bob Wilson, N6TV" <n6tv at arrl.net> wrote:
> 
> > Also, under the *Misc* tab, make sure that *Decode only in the CW Segments* is
> > *unchecked*.  If you prefer to leave it checked, you will have to edit:
> > 
> > c:\Users\[*UserName*]\AppData\Roaming\Afreet\Reference\*BandPlan.ini*
> > 
> > To remove the "Beacons" lines.  The default is the segment between 14099
> > and 14101 (and other NCDXF Beacon Frequencies) is marked as "Beacons"
> > instead of CW.
> > 
> > 14070=DIG,CW
> > 14099=Beacons
> > 14101=DIG,PH,CW
> > 14112=PH,CW
> > 
> > 73,
> > Bob, N6TV
> > 
> > On Sun, Feb 1, 2015 at 2:30 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
> > 
> > > There is a small typo in the blog post.  The correct location is:
> > >
> > > c:\Users\[*UserName*]\AppData\Roaming\Afreet\*UserData*\Watch.lst
> > >
> > > (not "User Data" with a space).  Substitute your Windows sign-in ID for [
> > > *UserName*], no brackets.
> > >
> > > Please make sure the file name is *Watch.lst* and not *Watch.lst.txt*
> > > (with ".txt" hidden by Windows if *Hide extensions for known file types* is
> > > enabled, which is the Windows default, unfortunately).
> > >
> > > To change that Windows default file display setting so that you can see
> > > the complete and true file names, follow the instructions here:
> > >
> > >
> > > http://docs.win-test.com/wiki/Check_Partial_and_Np1_Files#Viewing_hidden_files_and_folders
> > >
> > > If you see Watch.lst.txt, change it to Watch.lst (to be even more clear,
> > > the last three letters are LST, short for "List", not "IST".
> > >
> > > In CW Skimmer settings, is *Callsign Validation* set to *Normal*?
> > >
> > > Finally, if you uncheck the button at the top of CW Skimmer, as shown
> > > below, you can see *all* of the text that is being decoded.  Since the
> > > callsigns are only sent once, any fading will usually cause problems with
> > > the decoding, e.g. 4U1UN was copied as UA4UN in this example:
> > >
> > > 73,
> > > Bob, N6TV
> > >
> > > On Sun, Feb 1, 2015 at 4:57 AM, Dai NAGAKURA <ndai at cameo.plala.or.jp>
> > > wrote:
> > >
> > >> Dear members.
> > >>
> > >> de JF2IWL, Dai from central Japan.
> > >>
> > >> I started IBP beacon pick up besides QS1R normal skimmer with
> > >> another SDR
> > >> I can see some beacons on the CW Skimmer's WF,
> > >> However, It does not decode.
> > >>
> > >> My system is:
> > >> WinXP3 ,CW Skimmer1.8 .SDR=AFEDRi by 4Z5LV Alex,
> > >> Watch.lst is in same folder of CW skimmer.
> > >> (I follow Pete's blog
> > >> http://reversebeacon.blogspot.jp/2014/02/ncdxf-beacon-spotting-redux.html
> > >> CQ only check is unbuttoned.
> > >> Band width of AFEDRi SDR is 24kHz
> > >>
> > >> It can decode normal station and can up to RBN by Aggregator3.0.
> > >> I wonder what is wrong ?
> > >> Please some advise.
> > >> Thank you for your cooperation.
> > >>
> > >> Dai Nagakura JF2IWL
> > >>
> > >> --
> > >> Dai NAGAKURA <ndai at cameo.plala.or.jp>
> > >>
> > >> _______________________________________________
> > >> Skimmertalk mailing list
> > >> Skimmertalk at contesting.com
> > >> http://dayton.contesting.com/mailman/listinfo/skimmertalk
> > >>
> > >
> > >
> 
> -- 
> Dai NAGAKURA <ndai at cameo.plala.or.jp>
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk

-- 
Dai NAGAKURA <ndai at cameo.plala.or.jp>



More information about the Skimmertalk mailing list