[Skimmertalk] Skimmer and aggregator question(s)

Pete Smith N4ZR n4zr at contesting.com
Mon Jun 11 11:30:48 PDT 2012


I think the approach of "multiple Skimmer instances> Wintelnetx > 
Aggregator" is the way to go.

73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000


On 6/11/2012 11:54 AM, David Robbins wrote:
> #1 not sure what the best way to do multiple softrocks/aggregators would work, but if you get the spots to the rbn then the best way to view/filter them is through an arc-6 node since you can set filters to do all sorts of useful things.
>
> #2 no, you do not have to open anything to the interwebs, the aggregators push your spots to the rbn where everyone else can get them, there is no reason for anyone to connect to your computer from anywhere.
>
>
>
> Jun 11, 2012 11:44:11 AM, kazeringue at aol.com wrote:
>
> Hi folks.
>
> Finally laid hands on a couple of softrock kits, and I am finally
> getting a chance to play with skimmer and SDR. Way fun. I expected the
> surface mount parts to be difficult when building the first Softrock.
> Never tried any surface mount project before. Wrong. Turns out reading
> the numbers to sort out the capacitors was the hard part. Bright lights
> and magnification, and even my 17yo son had trouble(and he has 20/13
> vision).
>
> But enough digression.
>
> Bought skimmer license, have skimmer running on 40m and 80m. 40m
> calibrated(I think), 80m still pending.
>
> Question#1
> I'm not clear on the relationship between the skimmers and aggregator.
> If I run a skimmer session for each softrock, do I run aggregator for
> each skimmer?
>
> My initial expectation was to run the skimmer sessions for each
> Softrock, use wintelnetx to put the spots together, and use aggregator
> to ship the spots to the RBN from the wintelnetx window/port used to
> collect the spots.
>
> I found the documents N4ZR has written to be "spot on", but I have not
> seen/found any that describe this relationship. (I probably did not
> look hard enough....???..hints appreciated)
>
> Question #2
> Is it necessary/required to open the port to the skimmer/aggregator to
> the world_wide_interwebz? I would really rather not do that at this point.
>
> Other trivia:
> With two skimmers running on mostly dead bands, a dual core Pentium D
> (Dell Optiplex 745) ticks off about 15-20% CPU when the skimmers are
> minimized. The 80m softrock skimmer is at 48khz on the on-boad
> Soundmax. The 40m softrock skimmer is at 96khz on an ASUS Xonar DG.
>
> The Xonar DG seems to be a fantastic value for a sound card. Also
> available as PCI-E, Xonar DGX. Its main limitation over the more
> expensive siblings in the Xonar line seems to be its 96khz max sample
> rate, vs 192khz for big brother.
>
> 73 de w4kaz
>
>
>
>
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>


More information about the Skimmertalk mailing list