TenTec
[Top] [All Lists]

Re: [TenTec] Preselector for SDR

To: k9yc@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Preselector for SDR
From: Spencer <w1gak@arrl.net>
Date: Sat, 17 Sep 2016 11:09:41 -0600
List-post: <mailto:tentec@contesting.com>
Jim Brown wrote:
t would work quite well as a receive antenna. And yes, magnetic loops are well known to have quite narrow bandwidth, which would allow nulling interference along one axis. N6RK uses a magnetic RX loop to null his own transmit antenna so that he can run SO2R during 160M contests. He puts one station on 1801 running (calling CQ) and the
I found that the magnetic loop was the only antenna that I could use at the 2016 QUARTZFEST. Hundreds of switch mode power supplies.
Tuning is a problem but they work.


<Prev in Thread] Current Thread [Next in Thread>