The best contact cleaner is brown paper from an old paper bag. NEVER NEVER
NEVER use sand paper on
any electrical contacts. You might add a little Deoxit to the paper and apply
slight pressure to the contact
as you wipe the paper back and forth. Most of the contacts are sliver plated
and once it is gone, you might
as well throw it out. Did I say NEVER use sand paper? Well DON"T!!!!!
Clayton N4EV
--------------------------------------------
On Mon, 5/9/16, MARY DOUGLAS <mmdtodwd@gmail.com> wrote:
Subject: Re: [TenTec] Mike Element
To: "Wolf Wita" <g4ssx@yahoo.co.uk>, "Discussion of Ten-Tec Equipment"
<tentec@contesting.com>
Date: Monday, May 9, 2016, 11:19 AM
My microphone has quit working
several times. The contact pins will corrode
and no matter how tight those little screws are they will
not make contact.
Unscrew the 2 phillips screw sand take out the microphone
assembly. Clean
the two pins from the mic boom with 320 grit sandpaper.
Clean the ends of
the 2 screws while you are at it. That should do it.
We Winter near South Padre Island in Texas and the
atmosphere there is very
salty.
Good luck & 73
KC0QQ
On Sun, May 8, 2016 at 2:25 PM, MARY DOUGLAS <mmdtodwd@gmail.com>
wrote:
> What is not working? I have had to fix mine 3 times
with no help from the
> factory.
>
> On Sun, May 8, 2016 at 3:24 AM, Wolf Wita via TenTec
<
> tentec@contesting.com>
wrote:
>
>> HiI have got a Ten-Tec 777 Dx Pro Headset,but the
Mikrofone is not
>> working .Can anyone tell me where to buy one?I
think its made by Heil.Many
>> ThanksWolf G4ssx
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|