TenTec
[Top] [All Lists]

Re: [TenTec] Fwd: digital modes

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Fwd: digital modes
From: pca pca <xtraham58@hotmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 6 Nov 2015 17:03:31 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
TNX Reed, so you think that I am on track?
Andy


> 

> 
> 
> On Fri,11/6/2015 10:14 AM, pca pca wrote:
> 
> > I thought that I might try some of the digital modes.
> >
> 
> Which modes are you interested in? There are many -- RTTY, PSK31, PSK63,
> Olivia, or the WSJT modes designed for weak signal work and meteor scatter?
> 
> 
> What seems to be the Software of choice for using this cable with the
> > Orion2.
> >
> 
> The software you need has NOTHING to do with the Orion 2, and EVERYTHING to
> do with the modes you want to operate. FLDIGI and WinWarbler are two
> popular free programs that do the most popular modes except the WSJT modes.
> For JT65 and JT9, you want WSJT-X.
> 
> You will want three connections between your computer and your radio.
> 
> 1) RS-232 / USB for radio control and logging
> 
> 2) TX audio from the computer to the radio to send the digitally encoded
> signal to the radio's audio input
> 
> 3) RX audio from the radio to the computer so that the computer can decode
> the digital signal
> 
> I recommend using a good quality USB audio interface for #2 and #3. See
> http://k9yc.com/USB_Interfaces.pdf  for specific recommendations and advice
> about setup.
> 
> If your computer has a serial port, use a standard serial cable. If it does
> not, buy a USB to Serial adapter. Make sure that it uses the FTDI chipset
> -- other brands are well known to be problematic. And make sure that what
> you're buying is not a counterfeit -- the cheap stuff on eBay and amazon is
> very likely to be counterfeit.
> 
> 73, Jim
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 
> ​I have been using the 712 with my "original" Orion for #2 and #3 for a
> number of years with no difficulties. I primarily use fldigi, and, as Jim
> suggested, use a separate RS-232 cable for rig control and PTT. I had mixed
> results with the USB to RS-232 adapters, and because I use a desktop PC,
> was able to add a 2 port "real" serial card to my computer. Works all the
> time, every time!
> 
> 73,
> 
> Reed / WW3A​
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
                                          
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>