TenTec
[Top] [All Lists]

Re: [TenTec] Fw: Relays for a Paragon. Hopefully......

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Fw: Relays for a Paragon. Hopefully......
From: Wade Staggs <tvman1954@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 1 Nov 2015 06:42:39 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
*Two quick updates. First, we won't be selling parts from this Paragon. The
parts for the Low Pass Filter Board, are all that is needed to have a great
rig again. Second, Parts from an Eagle, have a very low chance of fitting
this 1980's Rig. Thanks for both inquiries.*
*                                                                73 from
Wade/KJ4WS *

On Sat, Oct 31, 2015 at 10:33 AM, Gary J FollettDukes HiFi <
dukeshifi@comcast.net> wrote:

> I have an Omni 6 meter, same meter.
>
> Gary
>
>
>
> > On Oct 30, 2015, at 5:10 PM, John King via TenTec <tentec@contesting.com>
> wrote:
> >
> > Do you still have the Paragon's S meter ?
> >
> >      On Thursday, October 29, 2015 1:08 PM, Rodney <w3krq@dejazzd.com>
> wrote:
> >
> >
> > I still have this complete with 14 relays for sale these relays are
> surface
> > mount.  This would be good insurance at 110.00 when it cost 110.00 labor
> at
> > TenTec.
> >
> > -----Original Message-----
> > From: Rodney
> > Sent: Saturday, October 24, 2015 5:32 PM
> > To: Discussion of Ten-Tec Equipment
> > Subject: Re: [TenTec] Relays for a Paragon. Hopefully......
> >
> > I have a low pass board for a Ten Tec Eagle . I though I needed a relay
> > found out the trouble was on the tuner board. I now have a complete board
> > for the Eagle if I had sent the Eagle down for repairs it would have
> cost me
> > shipping and 110.00 for labor plus parts, It cost me 190.00 for the
> board, I
> > no longer have the Eagle so I am selling the low pass board for 140.00
> > shipped.
> >
> > -----Original Message-----
> > From: Wade Staggs
> > Sent: Saturday, October 24, 2015 5:17 PM
> > To: Discussion of Ten-Tec Equipment
> > Subject: Re: [TenTec] Relays for a Paragon. Hopefully......
> >
> > *Thanks Peter,*
> > *                        If we can't get OEM? My plan will now be to
> > replace them all. And thanks again for the advise.*
> > *                                                      73 from
> Wade/KJ4WS*
> >
> > On Sat, Oct 24, 2015 at 3:56 PM, Peter Frenning [OZ1PIF] <
> peter@frenning.dk>
> > wrote:
> >
> >> Den 24-10-2015 kl. 21:57 skrev Wade Staggs:
> >>
> >>> *Paul, at Ten Tec says that the Relays for the Low Pass Filter Board
> for
> >>> the Paragon, are no longer available. Written on the white body of the
> >>> relay is Wabash and the part # on the relay is 1925-3-2 ...... I am
> >>> finding
> >>> them pretty Unobtainium from all of my usual sources also. Does anyone
> >>> have
> >>> a decommissioned Paragon with a good Low Pass Filter Board? Or any
> spares
> >>> of this relay? We have found some Wabash Reed Relays that are a perfect
> >>> Sub. Exact Pin Out and Dimensions. The relays we found do the exact
> same
> >>> job in a Collins KWM-380. I just hate to use Non OEM Parts, no matter
> how
> >>> close the match is.*
> >>> *                                                    73 to All from
> >>> Wade/KJ4WS*
> >>>
> >>> Please note, if you have to go the second source route, that you have
> to
> >> pair the relays so that a given band will be using to identical relays,
> >> (same close/open characteristics and current consumption).
> >>
> >> Several years ago, while I still owner my Paragon, I had to go that
> route,
> >> and Paul at TT stressed the point to me (was also very helpful with
> >> obtaining alternative relays)
> >>
> >> --
> >> Vy 73 de OZ1PIF/5Q2M, Peter
> >>
> >> ******************************************
> >> ** If it sounds too good to be true --  **
> >> ** it is!                              **
> >> ** If it sounds about right -- make    **
> >> ** sure you can afford to be wrong!    **
> >> **                                      **
> >> **          -- Robert Heinlein:        **
> >> **          "Time enough for love"    **
> >> ******************************************
> >> email: peter(no-spam filler)@frenning.dk
> >> http://www.frenning.dk/oz1pif.htm
> >> Ph. +45 4619 3239/ +45 2332 9464
> >> Snailmail:
> >> Peter Frenning
> >> Ternevej 23
> >> DK-4130 Viby Sj.
> >> Denmark
> >> ******************************************
> >>
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/tentec
> >>
> >
> >
> >
> > --
> > *Living one day at a time with Jesus as my Savior. But, still having
> Fun.*
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>



-- 
*Living one day at a time with Jesus as my Savior. But, still having Fun.*
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TenTec] Fw: Relays for a Paragon. Hopefully......, Wade Staggs <=