[TenTec] Omni 6 Plus 10m problem

[k8mp@aol.com]

<div id="AOLMsgPart_2_1543b0dd-cc94-4a1f-80b6-9f346870b6a6">

<div id="AOLMsgPart_2_aac3ce1f-77eb-490b-8586-2e8fda91928c">
Radio Gurus,
My Omni 6 Plus has an intermittant no RX/TX problem on ten meters only. The 
freq display reads correctly and the ALC led comes on as it should when I key 
the rig. 
I spoke with Paul at Ten Tec. He thinks it's almost certainly a problem on the 
oscillator/LO mixer board. (I.e a Lock Pulse problem)
I thought I'd run it by you guys before I rip into it.
Later, Joe


Sent from AOL Mobile Mail
</div>

</div>