Re: [TenTec] Subject: Re: din connector, news from Hall Mountain KY

[Steve Berg <wa9jml@frontier.com>]

I have had great results from using Mike's Amp Keyer with my Argonaut II 
and my boatanchor 6 meter setup.  I use the Amp Keyer to switch the coax 
relay, and also the transmit connections on the back of my P&H 
transmitting converter.  I use the P&H and a Tapetone dual cascode 6 
meter receiving converter.  The receiving converter is slightly modified 
to take the LO from the P&H.  It works surprisingly well!  I put in the 
mod to run the transmit key line out of the Argo II.  It takes some care 
to get the hang time set on the Argo.  Mike's product is well made and a 
real help when dealing with the limited switching current specs of the Argo.
Steve WA9JML

EN51