Thanks to Allen, W7GIF, the Corsair II 17M issue is resolved. Allen pointed
me to the Osc/Mixer board and band switch. After massaging the B/S and
re-seating of connectors, the 561 is purring fine once again.
73, Ron / K5XK
-----Original Message-----
From: Ron | K5XK [mailto:qrzthedx@gmail.com]
Sent: Sunday, July 06, 2014 5:50 PM
To: 'tentec@contesting.com'
Subject: Corsair II 17M Issue
Hoping some of you with Corsair II / Model 561 experience can provide some
guidance. The rig, in combination with the 263 remote VFO, works great on
all bands except 17 Meters. On 18 Mhz, I have no receive and the digital
readout is: 91000.0 ; there is some TX output, however.
Page 3-29 of the manual shows that this is the correct display for the
counter preset with the VFO jumper removed (SBN), and 90.997 (SBR). I have
tried it with and without the remote VFO and/or a jumper on the ACCESS plug.
Suggestions?
Tks & 73, Ron K5XK
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|